How to correct, fix: Make sure to install both ink cartridges even when you set the machine to use only one ink cartridge in printing. The ink cartridge(s) cannot be recognized.
Printing with an empty ink cartridge may cause the machine to malfunction.Į5 – The ink cartridge(s) is not installed. After printing completes, replace the empty ink cartridge. How to correct, fix: An ink cartridge is empty. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark. Confirm only recommended paper is installed.Ĥ. Confirm there is no foreign material inside the machine.Ģ. If paper jams frequently occur, check the following:ġ. How to correct, fix: Remove the jammed paper. Clean the paper feed roller to resolve the error. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark.Ĥ. Confirm only recommended paper is installed.ģ. When paper is installed, check each of the following items and try printing again.ġ. How to correct, fix: If paper is not installed, load it and then press the or button. If the problem is not resolved, the machine may require service.Į2 – No paper, Paper does not feed error. Wait approximately ten minutes then plug in the power cord and turn the machine on. Turn the machine off, and remove the power cord from the electrical outlet. Wait until the device has completed its cycling process before submitting another job request. Wait approximately ten seconds and then press the button again. (The display will go blank.) Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer. On the operator panel, press and hold the button for one second. If the device is not functioning properly or to clear memory, reset it. How to correct, fix: Press ON/OFF switch to reset the multifunction device Reset the device when it is not functioning properly. How to correct, fix: Reseat ink cartridge for Printer (MP160 / MP180 / MP460) Issue: ERROR LED: E, 1, 4